SSP1A450M7T Solid State Relay SSR Harmony by Schneider Electric

SKU: SSP1A450M7T

Description

SSP1A450M7T Solid State Relay SSR

Harmony by Schneider Electric

SSP1A450M7T Datasheet (PDF)

 

Main
range of product Harmony Solid State Relays
product or component type Solid state relay up to 50 A
Provided accessory Thermal pad
device short name SSP1
Number of phases 1 phase
[In] rated current 50 A
solid state output type SCR output
Zero voltage switching
output switching mode Zero voltage switching

 

Complementary
[Uc] control circuit voltage 90…280 V AC
minimum switching voltage 90 V AC turn-on
maximum switching voltage 10 V AC turn-off
response time 30 ms (turn-off)
25 ms (turn-on)
Input current 5…10 mA
output voltage 48…660 V AC
load current 0.15…50 A
Transient overvoltage 1200 V
surge current 625 A for 16.6 ms
maximum I²t for fusing 1770 A².s for 10 ms at 50 Hz
1629 A².s for 8.33 ms at 60 Hz
Co-ordination type Type 1 – 40 A miniature circuit breaker (MCB) – curve B
Type 2 – 32 A miniature circuit breaker (MCB) – curve B
maximum leakage current 1 mA off-state
maximum voltage drop <1.15 V on-state
dV/dt 500 V/µs off-state at maximum voltage
Power factor 0.5 (with maximum load)
Motor controller rating 0.75 hp 120 V AC
2 hp 240 V AC
5 hp 480 V AC
insulation resistance 1000 MOhm at 500 V DC
Maximum capacitance 8 pF for input/output
dielectric strength 4 kV AC for input/output
4 kV AC for input or output to case
[Uimp] rated impulse withstand voltage 6 kV output to case
6 kV input to output
tightening torque 1.5…1.7 N.m for input
2…2.2 N.m for output
connections – terminals Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) with cable end for input
Screw terminals: 0.5…5.26 mm², (AWG 20…AWG 10) with cable end for output
Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) without cable end for input
Screw terminals: 0.5…8.26 mm², (AWG 20…AWG 8) without cable end for output
Forked type tag connectors: 9.2 x 4 mm for input
Ring lugs: 9.2 x 4 mm for input
Forked type tag connectors: 11.7 x 4.5 mm for output
Ring lugs: 11.7 x 4.5 mm for output
Thermal resistance 0.45 °C/W junction to case
thermal pad impedance 0.48 °C-in²/W at 25 psi
LED indicator LED, green for input
IP degree of protection IP20
safety reliability data B10d = 1731395
MTTFd = 1875.9 years
net weight 89.2 g
device presentation Complete product

 

Environment
ambient air temperature for operation -40…80 °C
ambient air temperature for storage -40…125 °C
pollution degree 2
overvoltage category III
product certifications CE
UL
CSA
EAC
marking EAC
UL
CSA
CE
standards EN/IEC 60950-1
CSA C22.2 No 14-13
UL 508
EN/IEC 62314

 

Dimensions


(1)
Front view
(2)
Side view
(3)
Bottom view

Additional information

Weight 1 lbs
Dimensions 8 × 6 × 3 in
Brand

You may also like…