SSP1A110BDT Solid State Relay SSR Harmony by Schneider Electric

SKU: SSP1A110BDT

Description

SSP1A110BDT Solid State Relay SSR

Harmony by Schneider Electric

SSP1A110BDT Datasheet (PDF)

 

Main
range of product Harmony Solid State Relays
product or component type Solid state relay up to 10 A
Provided accessory Thermal pad
device short name SSP1
mounting support Panel
Number of phases 1 phase
[In] rated current 10 A
solid state output type SCR output
Zero voltage switching
output switching mode Zero voltage switching

 

Complementary
[Uc] control circuit voltage 3…32 V DC
minimum switching voltage 3 V DC turn-on
maximum switching voltage 1 V DC turn-off
response time 0.5 cycle (turn-on)
0.5 cycle (turn-off)
Input current 10 mA at 12 V DC
output voltage 24…300 V AC
load current 0.15…10 A
Transient overvoltage 600 V
surge current 120 A for 16.6 ms
maximum I²t for fusing 60 A².s for 8.33 ms at 60 Hz
66 A².s for 10 ms at 50 Hz
Co-ordination type Type 1 – 13 A miniature circuit breaker (MCB) – curve B
Type 2 – 10 A miniature circuit breaker (MCB) – curve B
maximum leakage current 1 mA off-state
maximum voltage drop <1.15 V on-state
dV/dt 500 V/µs off-state at maximum voltage
Power factor 0.5 (with maximum load)
Motor controller rating 0.5 hp 120 V AC
1 hp 240 V AC
insulation resistance 1000 MOhm at 500 V DC
Maximum capacitance 10 pF for input/output
dielectric strength 4 kV AC for input/output
4 kV AC for input or output to case
[Uimp] rated impulse withstand voltage 6 kV output to case
6 kV input to output
tightening torque 1.5…1.7 N.m for input
2…2.2 N.m for output
connections – terminals Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) with cable end for input
Screw terminals: 0.5…5.26 mm², (AWG 20…AWG 10) with cable end for output
Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) without cable end for input
Screw terminals: 0.5…8.26 mm², (AWG 20…AWG 8) without cable end for output
Forked type tag connectors: 9.2 x 4 mm for input
Ring lugs: 9.2 x 4 mm for input
Forked type tag connectors: 11.7 x 4.5 mm for output
Ring lugs: 11.7 x 4.5 mm for output
Thermal resistance 1.03 °C/W junction to case
thermal pad impedance 0.48 °C-in²/W at 25 psi
LED indicator LED, green for input
IP degree of protection IP20
safety reliability data MTTFd = 1875.9 years
B10d = 1731395
net weight 89.2 g
device presentation Complete product

 

Environment
ambient air temperature for operation -40…80 °C
ambient air temperature for storage -40…125 °C
pollution degree 2
overvoltage category III
product certifications CE
CSA
UL
EAC
marking CE
EAC
CSA
UL
standards CSA C22.2 No 14-13
EN/IEC 62314
UL 508
EN/IEC 60950-1

 

Dimensions


(1)
Front view
(2)
Side view
(3)
Bottom view

 

Additional information

Weight 1 lbs
Dimensions 8 × 6 × 3 in
Brand

You may also like…