Eurotherm 3200I Series Limit Alarm and Indicator Units 3216I, 3204I, 32H8I

$0.00

SKU: 3200i

Model Options * 

Supply Voltage * 

Outputs 1 2 and 3 * 

AA Relay * 

Options * 

Fascia Colour * 

Manual Language * 

Description

Eurotherm 3200I Series Limit Alarm and Indicator Units

Eurotherm 3200I Models: 3216I, 3204I, 32H8I

Eurotherm 3216I Datasheet (PDF)
Eurotherm 3204I Datasheet (PDF)
Eurotherm 32H8I Datasheet (PDF)

  • Universal input
  • Strain gauge input
  • Changeover relay
  • PV Retransmission
  • Scrolling text messages
  • Parameter help text
  • Recipes
  • Modbus comms

The 3204i indicator offers accurate indication and alarming of temperature and process measurements. Process interlocks, including over temperature furnace limits, are implemented using relay output channels.

The emphasis is on ease of use. A simple ‘QuickStart’ code is used to configure all the functions essential for indication and protecting your process. This includes input sensor type, measurement range and alarms making ‘Out of the Box’ operation truly achieveable.

In operator mode every parameter has a scrolling text message describing its function and is available in English, German, French, Spanish or Italian.  More advanced features are configured using iTools with a PC based configuration wizard – giving an easy to use, instructive guide to all the functions in the indicator.

Recipes

Recipes can be created using the PC tool. These recipes can be used to change the operating parameters of the 3200i simply by selecting the relevant recipe via the 3200i front panel push buttons.

Analogue Retransmission

The measured process value can be retransmitted as either a mA or voltage signal with a selection of outputs including 4-20mA and 0-10Vdc.

Digital Communication

All units support both EIA232 and EIA485 communication using the Modbus protocol as a slave device. It is also possible to digitally retransmit one parameter using a Modbus broadcast to all other Modbus devices on the network.

IDEAL FOR:
  • Temperature & process indication
  • Level/pressure/flow
  • Process protection
  • Heat treatment – furnace over temperature
  • Plastics – extrusion melt pressure
  • Weighing platform

32h8i Indicator and Alarm Unit

  • Universal input 
  • Strain gauge input
  • Changeover relay
  • PV Retransmission
  • Scrolling text messages 
  • Parameter help text
  • Recipes
  • Modbus comms 

 

The 32h8i indicator offers accurate indication and alarming of temperature and process measurements. Process interlocks, including over temperature furnace limits, are implemented using relay output channels.

The emphasis is on ease of use. A simple ‘QuickStart’ code is used to configure all the functions essential for indication and protecting your process. This includes input sensor type, measurement range and alarms making ‘Out of the Box’ operation truly achieveable.

In operator mode every parameter has a scrolling text message describing its function and is available in English, German, French, Spanish or Italian.  More advanced features are configured using iTools with a PC based configuration wizard – giving an easy to use, instructive guide to all the functions in the indicator.

Recipes

Recipes can be created using the PC tool. These recipes can be used to change the operating parameters of the 3200i simply by selecting the relevant recipe via the 3200i front panel push buttons.

Analogue Retransmission

The measured process value can be retransmitted as either a mA or voltage signal with a selection of outputs including 4-20mA and 0-10Vdc. In the 32h8i this signal is isolated from all other electronics within the unit.

Digital Communication

All units support both EIA232 and EIA485 communication using the Modbus protocol as a slave device. It is also possible to digitally retransmit one parameter using a Modbus broadcast to all other Modbus devices on the network.

IDEAL FOR:
  • Temperature & process indication
  • Level/pressure/flow
  • Process protection
  • Heat treatment – furnace over temperature
  • Plastics – extrusion melt pressure
  • Weighing platform

  • Universal input 
  • Strain gauge input
  • Changeover relay
  • PV Retransmission
  • Scrolling text messages 
  • Parameter help text
  • Recipes
  • Modbus comms

 

The 3216i indicator offers accurate indication and alarming of temperature and process measurements. Process interlocks, including over temperature furnace limits, are implemented using relay output channels.

The emphasis is on ease of use. A simple ‘QuickStart’ code is used to configure all the functions essential for indication and protecting your process. This includes input sensor type, measurement range and alarms making ‘Out of the Box’ operation truly achieveable.

In operator mode every parameter has a scrolling text message describing its function and is available in English, German, French, Spanish or Italian.  More advanced features are configured using iTools with a PC based configuration wizard – giving an easy to use, instructive guide to all the functions in the indicator.

Recipes

Recipes can be created using the PC tool. These recipes can be used to change the operating parameters of the 3200i simply by selecting the relevant recipe via the 3200i front panel push buttons.

Analogue Retransmission

The measured process value can be retransmitted as either a mA or voltage signal with a selection of outputs including 4-20mA and 0-10Vdc.

Digital Communication

All units support both EIA232 and EIA485 communication using the Modbus protocol as a slave device. It is also possible to digitally retransmit one parameter using a Modbus broadcast to all other Modbus devices on the network.

IDEAL FOR:

  • Temperature & process indication
  • Level/pressure/flow
  • Process protection
  • Heat treatment – furnace over temperature
  • Plastics – extrusion melt pressure  
  • Weighing platform

Additional information

Weight 2 lbs
Dimensions 10 × 7 × 8 in
Brand

You may also like…