Dynisco UPR800-0-0-3 Replacement Eurotherm P304I/AL/VH/XXX/XXX Melt Pressure Indicator Controller Piccolo

$682.00

UPR800-0-0-3 Replacement P304I/AL/VH/XXX/XXX

SKU: P304I/AL/VH/

Description

Dynisco UPR800-0-0-3

Dynisco UPR800-0-0-3 pressure & process indicator is a field configurable and programmable instrument with a choice of 350 Ohm strain gauge, voltage or current input.

A display of the process variable is shown on a bright red five digit LED display, as well as a 35 segment LED bar-graph.

A second digital display will capture the peak reading (selectable high or low), can be blanked, or can be used as the indicator for the optional second process variable.

The UPR800-0-0-3 is the perfect solution for those who would like to have melt temperature and pressure readout conveniently on one instrument.


Replacement Eurotherm P304I/AL/VH/XXX/XXX

Melt Pressure Indicator, 85-264Vac 50-60Hz

(This unit is the exact same unit as the Dynisco and will plug into same sleeve, No wiring required)

 

P304I Web Link

Specifications

Both the piccolo P304i Melt Pressure indicator and P304c controller have a 50ms sample rate to give the fast-acting control and alarm functionality required in the plastics industry. The P304c controller provides outstanding control performance in an affordable package for a wide variety of pressure sensors.

INPUT/OUTPUT FLEXIBILITY

A strain gauge or process linear input is standard with an optional strain gauge input for differential pressure control, or a universal input for remote set-point. Up to two opto-isolated DC linear outputs are available for control or re-transmission along with one standard logic input for alarm reset/acknowledge or zero calibration of sensor. An additional four logic inputs may be selected for remote activation of functions like auto/manual mode selection and increase/ decrease of power output.

THE DISPLAY

A custom, dual-line 5-digit display provides a complete view of the process while a horizontal bar graph gives clear visual indication of the process input. The status of alarms, outputs, active set-point and engineering units are represented with clear beacons on the front of the unit.

CONFIGURATION

The P304 is fully software configurable using iTools PC configuration and parameter monitoring. iTools provides the ability to edit, store and ‘clone’ complete controller configurations as well as data logging and process monitoring capability.

 

FEATURES

  • Easy to integrate and use in new and legacy applications
  • Fast-acting alarms to protect against over-pressure
  • Responsive, precision PID control with overshoot inhibit
  • Easy, effective auto-tune
  • Universal + strain gauge inputs
  • Second input for differential pressure indication / control
  • Analogue re-transmission
  • Easy and flexible configuration via PC software or front panel
  • Modbus RTU digital communications
  • High visibility three colour LED display
  • Wipe-down, customizable front fascia
  • High reliability and quality
  • Three year warranty

Additional information

Weight 3 lbs
Dimensions 10 × 7 × 8 in
Brand

You may also like…